|
| Cut your MDF board to size. | |
|
| Lightly sand outer edges of the cut board. | |
|
| To create the design, lay the painter’s tape directly onto the unpainted/unprimed board - creating a vertical design. | |
|
| Prime the board spraying over the tape with the primer. | |
|
| Allow to fully cure per manufacturer’s recommendations. | |
|
| Once cured, spray paint over the taped primer. | |
|
| Two light coats may be needed. | |
|
| Remove tape gently while paint is still tacky about 10 minutes after you are done spraying. | |
