|
| Remove loose paint and rust with a wire brush or sandpaper. | |
|
| Lightly sand glossy surfaces. | |
|
| Clean with soap and water, rinse and let dry. | |
|
| Shake can vigorously for one minute after mixing ball begins to rattle. | |
|
| Shake often during use. Hold can upright 8-12” from surface and spray in a steady back-and-forth motion, slightly overlapping each stroke. Keep the can the same distance from the surface. Keep the can in motion while spraying. | |
|
| Apply 2 or more light coats a few minutes apart. For best results, apply multiple light coats versus one heavy coat. | |
|
| Allow to fully dry before use. | |
