| | | | | | | | | | The area to be undercoated needs to be cleaned. Use soap and water to wash away any road debris. Allow the area to dry. Removing wheels prior to undercoating is optional. | | | | Mask off surrounding areas to protect surfaces from overspray. | | | | Shake the Professional Grade Undercoating for one minute. You are now ready to begin application. | | | | Holding the can 12-16 inches from the surface, spray in a steady, even, back and forth motion, slightly overlapping each pass. You want to keep the can in motion while spraying. | | | | For best long-term results, apply two coats of Professional Grade Undercoating. Allow the product to dry only one to two minutes between coats. | | | | Let area dry before driving vehicle. | |
|
|  | | Print Version |
| | | | | | | | | |  | Rust-Oleum Professional Grade Undercoating | | | | Soap and water | | | | Low-tack masking tape | | | | Masking film | | |
|
| |
|
