|Before coating your garage floor, review the detailed instructions in the kit.|
|Prepare the floor: Remove any oil or grease spots using a cleaner/degreaser and a scrub brush. Mix the concentrated cleaner |
(included in kit) with 2 gallons of water. Apply to the surface and scrub in 10x10 sections using a stiff bristle brush. Rinse thoroughly.
|Mix the coating: Pour EPOXYShield Garage Floor Coating Part A into Part B and stir. Allow to stand - see the detailed instructions for the appropriate standing time. If you want to add anti-slip additive, add it to the mixed coating now.|
|Apply the coating: Cut in around the edges of your garage with a brush. Use a roller to apply EPOXYShield to the floor in 4x4 sections. Toss the decorative paint chips onto the wet film as you finish each section.|
|Your garage floor will be ready to walk in in 12-16 hours and ready for heavy items in 24-48 hours. Allow 7 days for full cure and vehicle traffic.|