The MULE is an easy-to-use Modified Urethane Latex Epoxy. It’s abrasion resistant, which makes it the ideal coating for high-traffic areas that are routinely cleaned and disinfected. This urethanized acrylic coating can be applied on indoor or outdoor surfaces including walls, doors, trim, railings and floors.

• Ultra-smooth finish
• Highly washable
• Great adhesion on multiple surfaces
• Low-odor, water-based formula
• For interior and exterior use
• VOC compliant nationwide

Where To Use The Mule

• Interior and exterior walls, doors, trim and floors
• Prepared and primed surfaces including metal, concrete, brick, cinderblock, wood and drywall 
• Previously painted surfaces
• Commercial spaces, offices, schools, hospitality, health care facilities and more

Available Sizes

• 1 Gallon
• 5 Gallon

Rust-Oleum® Premium 880 Elastomeric Roof Coating is a single component, rust preventative, water-based acrylic elastomeric roof coating.
This self priming, high build coating is designed for use on tightly adhered rusted surfaces or clean steel. It can also be used on metal, Modified Bitumen/Built-Up Roof (BUR) and Single-Ply roofing surfaces, and the excellent elongation properties of over 500% make it suitable for bridging small cracks. Premium 880 Elastomeric Roof Coating is suitable for over-coating previous coating systems that are in good sound condition.

• Self Primes over tight rust
• Over 500% Elongation
• Excellent Corrosion protection
• Bright White 88% reflectivity
• Rain resistant in 3 hours
• Rust preventative coating

6700 System 100% Solids Epoxy uses a unique cycloaliphatic hybrid chemistry that provides a high gloss, chemical and abrasion resistant finish for use in industrial and commercial environments. This unique chemistry also provides a 60 minute working time for an easy application experience for the end user.

• User friendly – Easy to mix two component system with a 60 minute pot life
• High gloss, chemical and abrasion resistant finish
• Fast return to service time; light traffic in 12-16 hours, vehicle traffic in 36-48 hours
• No primer required over properly prepared concrete
• VOC compliant nationwide 
• 2A:1B mix ratio

Available Sizes 

• 3 Gallon Kit Custom
• 15 Gallon Kit Custom

Please note: The below items are MTO only. Reach out to a rep for further details

• 6700 3 Gallon Kit Custom
• 6700 15 Gallon Kit Custom
• 6700 15 Gallon Kit Armor Gray
• 6700 15 Gallon Kit Light Gray
• 6700 15 Gallon Kit Dunes Tan
• 6700 15 Gallon Kit Clear

The MULE is an easy-to-use Modified Urethane Latex Epoxy. It’s abrasion resistant, which makes it the ideal coating for high-traffic areas that are routinely cleaned and disinfected. This urethanized acrylic coating can be applied on indoor or outdoor surfaces including walls, doors, trim, railings and floors.

• Ultra-smooth finish
• Highly washable
• Great adhesion on multiple surfaces
• Low-odor, water-based formula
• For interior and exterior use
• VOC compliant nationwide

Where To Use The Mule

• Interior and exterior walls, doors, trim and floors
• Prepared and primed surfaces including metal, concrete, brick, cinderblock, wood and drywall 
• Previously painted surfaces
• Commercial spaces, offices, schools, hospitality, health care facilities and more

Available Sizes

• 1 Gallon
• 5 Gallon

Rust-Oleum® Premium 880 Elastomeric Roof Coating is a single component, rust preventative, water-based acrylic elastomeric roof coating.
This self priming, high build coating is designed for use on tightly adhered rusted surfaces or clean steel. It can also be used on metal, Modified Bitumen/Built-Up Roof (BUR) and Single-Ply roofing surfaces, and the excellent elongation properties of over 500% make it suitable for bridging small cracks. Premium 880 Elastomeric Roof Coating is suitable for over-coating previous coating systems that are in good sound condition.

• Self Primes over tight rust
• Over 500% Elongation
• Excellent Corrosion protection
• Bright White 88% reflectivity
• Rain resistant in 3 hours
• Rust preventative coating

6700 System 100% Solids Epoxy uses a unique cycloaliphatic hybrid chemistry that provides a high gloss, chemical and abrasion resistant finish for use in industrial and commercial environments. This unique chemistry also provides a 60 minute working time for an easy application experience for the end user.

• User friendly – Easy to mix two component system with a 60 minute pot life
• High gloss, chemical and abrasion resistant finish
• Fast return to service time; light traffic in 12-16 hours, vehicle traffic in 36-48 hours
• No primer required over properly prepared concrete
• VOC compliant nationwide 
• 2A:1B mix ratio

Available Sizes 

• 3 Gallon Kit Custom
• 15 Gallon Kit Custom

Please note: The below items are MTO only. Reach out to a rep for further details

• 6700 3 Gallon Kit Custom
• 6700 15 Gallon Kit Custom
• 6700 15 Gallon Kit Armor Gray
• 6700 15 Gallon Kit Light Gray
• 6700 15 Gallon Kit Dunes Tan
• 6700 15 Gallon Kit Clear

Preformed anti-slip step covers immediately creates a durable, safe and slip resistant surface. SafeStep is available in medium and extra coarse grit as well as a variety of sizes. Ideally suited for stairs, landings, platforms, ramps and wash down areas.

• Excellent slip-resistance, even when wet
• Extremely durable and can withstand vehicle traffic
• Easy glue and screw installation
• Interior and exterior use